Main Products

Category

Contact Us

  • Contact: Alice
  • Tel : +86-318-7533332
  • Skype: boyangmesh
  • E-mail: sales@apmesh.com
  • More Contact >>

News

Your current location :Home > News > Hook plastic coated wire mesh

Hook plastic coated wire mesh

Plastic coated process
Package for hook flower net model is one of the anti-corrosion methods, domestic mature approach is: powder package method, it originated in the fluidized bed method, the so-called fluidized bed was originally on the winkler gas generator used in oil contact decomposition, then develop the gas solid two phase contact process, after gradually used in metal plastic coated.So sometimes still called fluidized bed coating method, the actual process is add powder coating to porous permeability at the bottom of the container flows (tank), by the blower from the bottom into the compressed air after processing, make the powder coating turning to "fluidized state".Become a uniform distribution of fine powder.We know solid flow pattern of fluidized bed is in the second stage (the first stage for fixed bed, the second phase phase for air transportation), on the basis of the fixed bed to continue increasing velocity (W), bed expansion and loose, bed height increased, each powder particles float, and leave the original position for a certain degree of mobile, has now entered the stage of fluidized bed.BC period of powder in fluidized bed expansion, its height (I) increases with the increasing of gas velocity, but bed (delta P) does not increase, the pressure changes within a certain range velocity without affecting the fluid power unit, the this is the characteristics of the fluidized bed, it is to use this feature to applied on the coating process.The uniformity of powder fluidized state in the fluidized bed is the key to ensure uniform coating.On the powder coating with fluidized bed belongs to "vertical fluidized", fluidization number must be tested to find out, generally to coating, powder suspended in fluid bed rate of up to 30 ~ 50%.Plastic coated method is as follows: for example, hook flower net after degreasing preheated to the powder melting point above, plastic powder will be uniform adhesion after dipping into the fluidized bed, and plasticizing of polymer crosslinking flow pp.47-53 gangsu composite products.